Expanding a Home Network

I've been working on a few different posts and haven't quite got the finishing touches on them, but I felt I should get this one out there.  In the past week, I have been asked to help out with expanding a home network using an old router at least four times.  With many ISPs providing routers, people are often finding themselves with an extra router.   So its only natural that they look to reusing an old router when trying to expand their wired or wireless network.

There are several approaches to adding a second router to a home network, in this post I'll look at the simplest and  probably the most common way.  Which is cascading a second router to operate as a WAP or switch.

 Whether you are using a wired or wireless router, the basic setup of the routers will be the same and can be done in five simple steps.

Using the Windows Command Window

 In a couple of my previous posts I've covered running various commands from  a command window like the one shown to the left.  Now while the command window is a simple application, which provides a way to run other applications or Windows commands, how to do some simple things in it  is not always clear.

For example I have run into many situations where someone does not know how to copy the text from the command window.  When helping someone in an online forum having the person copy and paste the information from a command window helps insure that the information that is posted is correct.  Because of that, I figured a quick overview of working with the command might be useful.

Sharing a Keyboard & Mouse

 You've most likely heard of KVM (Keyboard/Video/Mouse) devices that let you share a single keyboard, monitor, and mouse between multiple machines, Synergy is a software KM solution.   It allows you to share a keyboard and mouse between multiple computers, but still take advantage of having the display real-estate that multiple monitors offer. 

Setting MTU on Windows

The first questions that I imagine comes to the mind of many people is what is MTU and why should I care about it. I expect a more or less formal definition is not that useful when it comes to answering these questions.

Maximum Transmission Unit [MTU]
The largest possible unit of data that can be sent on a particular network implementation

The MTU can be thought of the largest amount of information, in bytes, that can be sent in a single message between two systems on a network, including those systems on the internet.  But still why should we care, the information can be sent in multiple messages, and in reality systems almost always send multiple messages.  The answer is that the MTU value that is used affects how efficient a system is when it transfers information to another system.

Running Ping from Windows

The ping command is one of the simplest commands that can be used for diagnosing networking problems, but it is also one I would be hard pressed to do without.  The primary use of the command is to send a network message to another system asking that system to respond back.  By doing this you can easily verify that the remote system can be reached from your system and get a gauge of the general transfer speed between the two systems.

Networking Terms

Over the past couple of years I've been pulling together a list of terms that frequently get tossed about when dealing with networking issues and trying to provide a definition that is easy for most folks to follow.  This list is by no means exhaustive and was meant all along to be a living document, growing and being revised as time goes by.

You can find this glossary of terms over in the forums at www.cybertechhelp.com.  Please feel free to post any comments here or at CTH.  My hope is to continue to improve it as time allows.

Using ipconfig & Wntipcfg.exe

In Windows, ipconfig is used to display basic network related configuration information, such as IP address, DNS servers, and DHCP settings.  It is a command line utility and as such it must  be run through XP's command window.  There are two basic ways to do this:

Either,
1)  Go to the Start menu and select Run...
     In the the Run dialog enter cmd /k ipconfig
Or

2)  Open a command window and then run ipconfig in the window
      In the Run dialog enter cmd, this will open a command window that can be used to run ipconfig.

Running ipconfig with no options will provide just the basic information, while running it with the /all option provides more detailed information on the network adapters in the system and their configuration.

ipconfig also has a /release and a /renew option.  They are only of use if DHCP is enabled and are used to release the currently assigned IP address and to request an assignment of a new IP address.  It is normal that a request for a new IP address results in the same IP address being assigned.

Note: For versions of windows earlier than XP, use command instead of cmd
Note: A GUI based version of ipconfig exists on  Windows  95/98/ME and is called winipconfig.

Note: Windows NT/XP/2000 do not come with a GUI version, but it can be downloaded from this page.